| Protection |
Surge
Protection redirects high energy transients harmlessly to earth
and away from associated equipment and operators.
Cost effective surge
protection for locations where an audible alarm is not essential.
|
|
| Applications [back to top] |
|
Protects PC's,
Colour Monitors, Scanners, Printers & Plotters, Fax Machines
and anything else using the standard IEC power inlet that
requires continuous electrical power.
|
Every
Inline Surge Protector is tested to ensure very fast operation
and minimum let through voltage. The unit appears invisible
to the mains filter fitted inside modern electronic equipment.
This state of the art patented product provides cost effective
mains transient protection. |
| Specifications [back to top] |
| Voltage Rating |
230 Volts |
|
Maximum Current Rating |
10 Amps |
| Maximum Current Surge Handling
|
2.5 kA |
|
Response Time |
<10nS |
| Protection Modes |
L-N, N-E, L-E |
|
Power 'ON' Indicator Light |
No |
| Protection Status Indicator
|
Yes |
|
Power Consumption |
0.3 Watts |
| Surge Handling Capability |
5kV
(1.2/50 us O/C) @ 2-5kA (8/20us S/C) Let through voltage
<900V 6kV (0.5us/100kHz Ring Wave) @ 500A (S/C) Let
through voltage <900V |
| Location
Category BS6651: 1992 Appendix C |
A-high
/ B-medium |
| Earth Leakage (typ.): |
30uA |
| Operating
temperature |
-5 oC
ro 40 oC (normal range) |
| Enclosure: |
Flame
retardant thermo plastic |
| Dimensions
(in mm) |
L
80
W 37
D 27
|
| Weight
(in grams) |
40 |
| Order
Code |
ISP5/Waltech |
| Audible Alarm |
No |
|
| Features [back to top] |
- Flame retardant
molding
- Thermal overload
protection fitted as standard
- Noise free
operation with automatic reset after transient has passed
- Incoming
and outgoing surges are dissipated so 'no fault found' service
calls are reduced and equipment performance is improved.
|
The
ISP5 has a neon light which indicates protection operational.
The light will extinguish should a high energy strike destroy
the internal protector, however power will still be supplied
to the associated equipment. Should the light go out the unit
must be replaced to restore surge protection. |
| Regulations [back to top] |
- Protection
elements comply with latest issue of UL 1449 Transient Voltage
Surge Suppressers (Aug 96)
- Complies
with the IT safety standard EN 60950
- Satisfies
the recommendations of BS6651 1991 Appendix C
|
The
internal surge suppressers are tested against 'worst case' conditions
as defined in International Standards IEEE C62.41-1991 Cat.
B2 (test wave 8/20us) |
| Prices [back to top] |
|
Wallis
Technologies are pleased to announce that soon you will be
able to purchase our innovative range of products directly
from this website through a secure credit card transaction
|
QUANTITY
|
COST*
|
|
1 to 99
|
GBP £7.20
|
|
100 to 999
|
POA
|
|
1,000 to 2,999
|
POA
|
|
3,000 Plus
|
POA
|
| UK RRP £13.50 inc VAT @17.5% |
*Local taxes and shipping to
be added at cost |
|
