| Protection
|
|
Surge Protection redirects high
energy transients harmlessly to earth and away from associated
equipment and operators.
Instant protection, using the
new C5 'Clover leaf' connector.
|
 |
| Applications [back to top] |
| Electronic equipment using the
new C5 'Clover leaf' connector ie; IBM / Dell / Apple / Compaq
notebooks. |
Every Inline Surge Protector
is tested to ensure very fast operation and minimum let through
voltage. The unit appears invisible to the mains filter fitted
inside modern electronic equipment. This state of the art patented
product provides cost effective mains transient protection. |
| Specifications [back to top] |
|
Voltage Rating
|
230 Volts
|
|
Maximum Current Rating
|
10 Amps
|
|
Maximum Current Surge Handling
|
2.5 kA
|
| Response Time |
<10nS
|
|
Protection Modes
|
L-N, N-E, L-E
|
|
Power 'ON' Indicator Light
|
No
|
|
Protection Status Indicator
|
Yes
|
|
Power Consumption |
0.6 Watts
|
|
Surge Handling Capability
|
5kV (1.2/50 us O/C) @ 2-5kA (8/20us
S/C) Let through voltage <900V 6kV (0.5us/100kHz
Ring Wave) @ 500A (S/C) Let through voltage <900V
|
| Location
Category BS6651: 1992 Appendix C |
A-high
/ B-medium |
|
Earth Leakage (typ.):
|
30uA
|
| Operating
temperature |
-5 oC ro 40 oC (normal
range) |
| Enclosure: |
Flame retardant thermo
plastic |
| Dimensions (in mm) |
L 70
W 38
D 25
|
| Weight (in grams) |
30 |
| Order Code |
ISP6/Waltech |
| Audible Alarm |
No |
|
| Features [back to top] |
- Flame retardant molding
- Thermal overload protection fitted as standard
- Noise free operation with automatic reset after transient
has passed
- Incoming and outgoing surges are dissipated so 'no fault
found' service calls are reduced and
- equipment performance is improved.
|
The ISP6 has a neon light which
indicates protection operational. The light will extinguish
should a high energy strike destroy the internal protector,
however power will still be supplied to the associated equipment.
Should the light go out the unit must be replaced to restore
surge protection. |
| Regulations [back to top] |
- Protection elements comply with latest issue of UL
1449 Transient Voltage Surge Suppressers (Aug 96)
- Complies with the IT safety standard EN 60950
- Satisfies the recommendations of BS6651 1991 Appendix
C
|
The internal surge suppressers
are tested against 'worst case' conditions as defined in International
Standards IEEE C62.41-1991 Cat. B2 (test wave 8/20us) |
| Prices [back to top] |
|
Wallis Technologies are pleased
to announce that soon you will be able to purchase our innovative
range of products directly from this website through a secure
credit card transaction
|
QUANTITY
|
COST*
|
|
1 to 99
|
GBP £7.20
|
|
100 to 999
|
POA
|
|
1,000 to 2,999
|
POA
|
|
3,000 Plus
|
POA
|
| UK RRP £13.50 inc VAT @17.5% |
*Local taxes and shipping to
be added at cost |
|
